دانلود رایگان مقاله تخمین بویلر کمکی جهت CO2 فوق بحرانی خورشیدی چرخه برایتون

عنوان فارسی
ارزیابی برآورد اندازه دیگ بخار کمکی برای فشرده سازی مجدد CO2 فوق بحرانی هدایت شده خورشیدی دوبل چرخه برایتون
عنوان انگلیسی
On the auxiliary boiler sizing assessment for solar driven supercritical CO2 double recompression Brayton cycles
صفحات مقاله فارسی
0
صفحات مقاله انگلیسی
11
سال انتشار
2016
نشریه
الزویر - Elsevier
فرمت مقاله انگلیسی
PDF
کد محصول
E2129
رشته های مرتبط با این مقاله
مهندسی انرژی
گرایش های مرتبط با این مقاله
انرژی های تجدید پذیر، سیستم های انرژی، فناوری انرژی
مجله
انرژی کاربردی - Applied Energy
دانشگاه
بخش علمی پژوهش در انرژی های تجدید پذیر (CoRERE)، موسسه تحقیقات، دانشگاه ملک فهد نفت و مواد معدنی، عربستان سعودی
کلمات کلیدی
برج قدرت حرارتی خورشیدی، بویلر، گیرنده مرکزی، چرخه فوق بحرانی CO2 برایتون، راندمان اکسرژی
۰.۰ (بدون امتیاز)
امتیاز دهید
چکیده

abstract


A performance assessment of sizing an auxiliary boiler for a solar driven supercritical double recompression CO2 Brayton cycle was conducted. The Brayton cycle is designed to deliver three different power outputs and the required size of the auxiliary boiler was examined in detail. The heat fraction to be delivered from the solar field and from the auxiliary boiler for each month of the year are reported. Furthermore, the daytime solar multiple and the twenty-four hour solar multiple were examined. Another key parameter that was studied is the effect of the turbine inlet temperature on the net power, energy efficiency, and exergy efficiency. Among the other exergy parameters that were examined are exergy destruction, exergy improvement potential, fuel depletion ratio, relative irreversibility, and productivity lack. The power output for Case 1, Case 2, and Case 3 is about 41.5 MW, 60.0 MW, and 90.0 MW, respectively; and for the month of June, the fraction of the heat from the auxiliary boiler during daytime hours is about 0.25, 0.40, and 0.54, respectively. For the three Cases the overall system energy efficiency during the month of June is 20.7%, 25.0%, 29.6%, and the overall system exergy efficiency is 22.2%, 28.3%, and 35.7%, respectively. The cycle efficiency is about 47% for the baseline conditions. In addition, the lowest thermal heat collected in the receiver is during December and, therefore, during this month, the highest auxiliary heat is required from the boiler. The 24-h average solar multiple for Case 1, Case 2, and Case 3 is 0.437, 0.303, and 0.202, respectively; and the average daytime solar multiple for these cases is 0.858, 0.590, and 0.396, respectively. Moreover, similar results are reported for each month of the year. Furthermore, the findings demonstrate that the heliostat has the highest exergy destruction rate and, thus, it has the highest exergy improvement potential.

نتیجه گیری

5. Conclusions


Energy and exergy analyses of a solar thermal power tower system integrated with a double recompression sCO2 Brayton cycle were conducted. The study considered different power outputs in which an auxiliary boiler maintains a constant turbine inlet temperature. Several important findings were presented and discussed. For example, for the month of June, the power output for Case 1, Case 2, and Case 3 is around 41.5 MW, 60.0 MW, and 90.0 MW, respectively, and the fraction of the heat from the auxiliary boiler during daytime hours is about 0.25, 0.40, and 0.54, respectively. The daytime solar multiple for the three Cases during the month of June is 1.00, 0.69, and 0.46, respectively. During the month of June the overall system energy efficiency for Case 1, Case 2, and Case 3 is 20.7%, 25.0%, 29.6%, respectively, while the overall system exergy efficiency is 22.2%, 28.3%, and 35.7%, respectively. Considering that the heliostat has the highest exergy destruction rate and the highest exergy improvement potential, improving the design of the heliostat is a key in the overall system design.


بدون دیدگاه